Fiberglass Body Parts
|
|
| Air flow sport hood vents | Fiberglass hood plain hood |
| The air flow hood kit allows for a front mounted radiator and or AC condenser. Air flow can be directed through the nose and exit out this hood vent allowing for optimal venting. NOTE: This is a large fiberglass part that can be attached to the existing Sterling hood. (Click for more images) | Fiberglass hood plain hood |
$168.00 | $367.50 |
|
|
| Fiberglass hood with air vent nostrils | Under body nose section fiberglass large |
| Fiberglass hood with air vent nostrils (fiberglass) | Under body nose section. Thick molded fiberglass part. Very Very large (5.5' x 6' x 1') Freight charge Thick molded fiberglass part. additonal over sized box included in cost. |
$387.50 | $926.00 |
|
|
| Rear hatch louver section, New flat surface | Rear Sport Hatch with Window |
| Rear hatch louver section, Fiberglass. NO texture like the original had on the surface. | NEW, rear Sport Hatch with ((dual windows)) and lower vents, more water resistant then classis louvers. |
$326.00 | $546.50 |
|
|
| Straight style dash and console (fiberglass) | Pod Dash Original Sterling Style (all 4 parts) |
| Straight style dash and console, most popular for adding room for AC and lots more options. (fiberglass) | Original Sterling style dual pod dash, all 4 parts, 2 Pods, 1 center console, and 1 Main dash. It one very cool dash and its back in production after 30 years. |
$378.00 | $429.50 |
|
|
| Pod base dash cross section | Pod only for Sterling style dash pod only. |
| Pod base dash cross section, ((NO pods)), ((NO center console)) just the under base dash panel. See images. | Pod only (You pick) Passenger or Driver side pod below option |
$247.65 | $72.10 |
|
|
| Lower body side panels fiberglass (left side only) | Lower body side panels fiberglass (right side only) |
| Lower body side panels fiberglass with air intakes (left side only) for original Sterling, very long part, | Lower body side panels fiberglass with air intakes (right side only) for the original Sterling kit car very long part. |
$526.49 | $526.49 |
|
|
| Engine cover, box shape type (fiberglass) | Engine cover for dual carb style VW engine |
| Engine cover, box shape type (fiberglass) | Engine cover for dual carb style VW engine only |
$157.00 | $152.00 |
|
|
| Hood RX Air Scoops | Lower RX air intake covers |
| (Hood) air scoops (Fiberglass) Set L and R. They direct air into the air intakes on the hood. (use only with hoods that have the air intake scoops) | (Lower) side panel air scoops L and R (Fiberglass) used to direct air into the air intakes on bottom panels. Some scoop shaping required. |
$83.00 | $53.00 |
|
|
| Side RX air intake scoops (fiberglass) | Ground Effects, Side Wing Panels L and R |
| Side Sterling-RX air intake scoops. Set of 2, L and R side. Keep rain out and direct air directly into your top side intake vents with these crescent shape side scoops, (see tech tips for information on fitting to car.) | These lower wings (ground effects) are great for hiding the drop floor pans. Fiberglass panels can be attached by screws, molded on, or 3M double sided tape. ((CLICK PHOTO FOR MORE DETAILS)) |
$72.00 | $245.00 |
|
|
| Original Sterling bucket seats (2) high-back fiberglass | Fiberglass side pockets for interior passenger (set) |
| Original Sterling low back bucket seats (2) high-back fiberglass, (very narrow to fit VW drop floor pan), Fiberglass seats with adjustible tracks only no pad or covers. NO upholstery (see covers) | Thick fiberglass side pockets for interior passenger compartment ((set of two)) originals were very thin parts. |
$356.00 | $129.00 |
|
|
| fiberglass sheet hand-laid for customizing 17" X 35" | fiberglass sheet hand-laid for customizing 36"X 35" |
| Let the customizing begin with our hand-laid fiberglass sheet. Size 17"X35" Very strong over 1/8" thick with a high gloss black gel coat finish. | Let the customizing begin with our hand-laid fiberglass sheet. Size 36"X 35" Very strong over 1/8" thick with a high gloss black gel coat finish. |
$72.95 | $98.95 |
|
|
| Rear lower body section fiberglass | Targa top with removable roof panel for original Sterling |
| Rear lower body section where taillights go. New Style fiberglass modern version with flat rear light panel section for more custom tail light options. | Targa top roof with removable roof panel. Add new life to your Sterling with this new top. (for the Origninal Sterling body style) ((call for shipping cost, must crate this product, included in shipping)) ((CLICK PHOTO FOR MORE DETAILS)) |
$342.95 | $2,734.85 |
|
|
| Rear window tunnel | Sterling RX Sports Car eith Body and Rolling Chassis |
| Rear window tunnel, fiberglass part, gloss black, the originals were only very thin plasic and do not last. | Sterling NEW RX style body, chassis with suspension, 4 wheel disk brakes. Body kit with DOT. Approved saftey glass, interior options. Carbon fiber reinforced composite fiberglass body. GO to ((( www.SterlingSportsCars.com ))) |
$168.00 | $19,850.00 |
